This automotive  mould has below features:

1、The part is about 1100X550mm size;

2、Large part and large tool and leather grain surface.

3、Many lifters and ribs at back side.

This automotive  mould has below features:

1、The part is about 650X400mm size;

2、Reversed injection and leather grain surface.

3、TST water manifold system and Kistler pressure sensor, Laser harden parting lines.

This automotive  mould has below features:

1、The part is about 750X120mm size;

2、1+1 cavity family mold with sequential controlled valve gates.

3、Laser grain surface and loudspeaker honeycomb cover.

This automotive  mould has below features:

1、The part is about 750X120mm size;

2、1+1 cavity family mold with sequential controlled valve gates.

3、Laser grain surface and loudspeaker honeycomb cover.

This automotive  mould has below features:

1、The part is about 750X650mm size;

2、Large part and large tool; can be single cavity tool either Stack 1+1 family tool as left and right. leather grain surface.

3、Many lifters and hot runner nozzles and injected at the back side as reversed.

This automotive mould has below features:

1、The part is about 500X300mm size;

2、Single cavity tool with IMD (In-Mold decorating) technology with wood foil.

3、5 drops valve gates and injection from the back side.

This automotive mould has below features:

1、The part is about 400X300mm size;

2、There are glove box, cover and trigger parts in the assembly.

3、The box is very complicated part and tool structure with big sliders. leather grain surface on the cover and flocked inside of the box.

This automotive mould has below features:

1、The part is about 350X120mm size;

2、Honeycomb completed cover the cavity surface which is done by super EDM.

3、8 drops valve gates hot runner and injected at the back side as reversed.

This automotive  mould has below features:

1、The part is about 1200X500mm size;

2、Gas-assisted; leather grain surface.

3、Very Complicated part and tool structure with big sliders.